Indoor Outdoor Factory Workshop Stain Resistant Polyurethane Super Abrasion Resistant Factory Floor Paint

Caveat

1. construction conditions: humidity less than 80%, temperature 10 ~ 35 ℃, humid environment prohibited construction.
2.  the foundation requirements: general construction in the epoxy self-leveling, self-leveling surface needs to be finer resin abrasive pads or sandpaper lightly sanded, the flatness of the foundation will affect the beauty of the cover paint.
3. Eliminate the roller coating marks and joint bright marks:
   ① a person scraping paint, a person rolling paint (perpendicular to the direction of scraping paint, it is recommended to tie heavy objects), the third person wearing spiked shoes to go up with an 18-inch short-haired roller and scraping paint in the same direction backward to close the roll, do not force.
   ② scrape the paint, the joints leave about 5 centimeters of spacing do not scrape the paint, roll the paint can be rolled up.
   ③ Joints should not be too long, joints with a roll of paint to collect one or two times to cover the paint can be, do not repeatedly collect, otherwise there will be joints bright marks.
4. After construction: under standard conditions (25℃,50%), it can be put on people after 1 day, and can bear heavy pressure after 3 days. If the temperature is low then need to extend the opening time.